https://www.youtube.com/watch?v=gYT0Cfb37ZA&ab_channel=ChrisO%27Neill
for:
TRRS
podcasts
what it do:
make soft and loud parts the same
--------------------------------------
4-steps-to-success:
1. remove noise
to remove MOST noise inside words
get noise sample
remove nosie
2. noise gate
to remove ALL noise in between sentences
cut out bg noise, but keep in everything else
threshold = -60dB
maybe -40
3. compressor
to bring up everything to be on equal levels
threshold = -56dB or -60
wet gain = +20dB
check mak up gaim for 0db
uncheck compress based on peaks
looks pretty good, but might be peaking, some parts still soft
********************THIS ONE********************
uncheck mak up gaim for 0db
check compress based on peaks
LOOKS the best, none looks too peaky, soft parts are loud
********************THIS ONE********************
uncheck mak up gaim for 0db
uncheck compress based on peaks
SUPER SOFT
check mak up gaim for 0db
check compress based on peaks
SUPER LOUD
4. remove SSes or high frequencies(optional)
DS (de-esser)
threshold = leave it
range = from 6 to 8
OR
go to eq and between 5k to 9k, bring it down
called filter curve in audacity
EQ - optional
remove 2k to 5k freq
use lever to isolate SHARP
5. Limiter
to 'shave' off the higher parts
6. Normalize
to bring up levels to the max
make max vol -1db(so can add music later)
